How do I know the base curve of my eye?
Figuring out the proper base curve based upon Rx is fairly simple: Plus Power – Use the Spherical Equivalent (Sphere power plus half the cylinder power) and add 4.00 diopter to that. Example – Rx of +2.50, the base curve will be approximately 6.50.
How do you measure base curve?
The base curve of any lens can be measured with a tool called a radius gauge, also known as a lens clock. A lens clock has three prongs that can measure the curvature of lenses (and other surfaces). When those 3 prongs are place against a flat surface, the gauge should read zero.
What is a normal base curve for eye?
between 8.0 and 10.0 mm
Typical base curve values range between 8.0 and 10.0 mm, though it can be flatter (from 7.0mm) if you have a rigid gas-permeable lens. A person with a higher base curve number has a flatter cornea (the clear, front surface of the eye) compared to someone with a lower base curve number, which indicates a steeper cornea.
How do I find the base curve of my contacts?
Base curve = 0.95 * 34.82 D = 33.07 D and then round up or down to the nearest whole diopter to arrive at the following final base curve to use for a contact lens over-refraction: Base curve = 33.00 D (actual measured base curve is 32.95 D)
What base curve do I need?
The most basic rule is that you always want the base curve to be as close to +6.00 as you can get and still have the Rx work. In theory +6.00 should always give you the best possible combination of curves for weight, optics, etc.
Should I get 8.4 or 8.8 base curve?
The 8.4mm base curve is still the likely best fit for the majority of eyes. In instances when the 8.4mm lens is too steep, the 8.8mm lens allows a flatter option. This is more likely needed in smaller eyes, and possibly in some very flat corneas.
How do you calculate base curve for soft contact lenses?
Simple Rule for estimating lens base curve on a PLUS POWER lens
- For plus power use the spherical equivalent (SE) and add 4.00 diopters to that. For example, if you have an Rx of + 2.00 sphere, the base curve for the lens will be approximately 6.00.
- Rx +2.00Sph -> [+2.00 +4.00D] = 6.00BC.
What is average base curve for contacts?
Studies show that a single base curve of 8.4mm managed a “good or better” fit in approximately 90% of individuals,1 and base curves of 8.4mm and 8.6mm together encompassed 98% of individuals.