How do I console my juniper EX2200?

By Other

How do I console my juniper EX2200?

To connect and configure the switch from the console by using the CLI:

  1. Connect the console port to a laptop or PC by using the RJ-45 to DB-9 serial port adapter.
  2. At the Junos OS shell prompt root%, type ezsetup .
  3. (Optional) Enter the hostname.
  4. Enter the root password you want to use for the device.

How do I connect my console to port Juniper?

How to Access a Juniper Networks Device the First Time

  1. Connect a laptop or a desktop PC to the console port on the front panel of the device.
  2. Power on the device and wait for it to boot.
  3. Log in as the user root .
  4. Type cli to start the Junos OS CLI.
  5. Type configure to access CLI configuration mode.

How do I enable the port on my juniper?

Enable/Disable Interface in Juniper

  1. root@Juniper# set interfaces ge-0/0/1.0 disable << This is cisco equivalent of “shutdown”
  2. root@Juniper# delete interfaces ge-0/0/1.0 disable << This is cisco equivalent of “no shutdown”
  3. root@Juniper#show ge-0/0/1.0. root@Juniper# run show interfaces ge-0/0/1.0 terse.

How do I reset my juniper EX2200 switch?

8. RE: reset factory default EX2200

  1. Start a root shell by logging in as root and then either omit the cli command or from operations mode, type start shell.
  2. Change into the /config directory by cd /config.
  3. Delete all files from there by rm *
  4. Reboot your device.

How do I connect to Juniper firewall?

  1. Connect your Juniper firewall device to an Ethernet port on a workstation or network hub/switch.
  2. If this is the first time you are using the WebUI, in the browser Address box, enter the default manage IP address: 192.168.
  3. From the Enter Network Password dialog box, enter your User Name and Password .
  4. Click OK.

What is the console port used for?

The console port is used to connect a computer directly to a Gigabit Ethernet switch and manage the switch since there is no display device for the switch. In most cases, it is the very first step to configure your network switch.

What is EM port in Juniper?

The me0 interface is a virtual interface between Junos and the host operating system, therefore its status is independent from the status of the physical port.

How do I change the port on a Juniper switch?

Edit Configuration of a Port

  1. To edit the port configuration by using a port profile: Click Use Port Profile. The Port Profile drop down list and an option to select VLAN appears.
  2. To edit the port configuration manually: Click Manually edit port configurations.

How do I reset my juniper EX2200 without password?

RE: Unable to reset password on EX2200 You can reset the device to factory default using the LCD front panel display and navigating to the “Maintenance Menu”. This should allow you to reset the device with no root password.

How do I factory reset my juniper switch from command line?

To restore the switch to the default factory configuration:

  1. Make sure you are in configuration mode.
  2. Enter the following commands at the CLI: [edit] user@switch# load factory-default [edit] user@switch# delete system commit factory-settings [edit] user@switch# commit. Note: